Lrl

can please explain, not able run adprep/forestrep command   c:\windows2008\support\adprep> c:\windows2008\support\adprep>adprep/forestrep image file c:\windows2008\support\adprep\adprep.exe valid, machine type other current machine. hi, please check steps described in following thread see if resolves issue. http://social.technet.microsoft.com/forums/en-us/windowsserver2008r2general/thread/3b838225-e047-411b-af96-2a5686dbf0c0 regards, wilson jia this posting provided "as is" no warranties, , confers no rights. please remember click “mark answer” on post helps you, , click “unmark answer” if marked post not answer question. can beneficial other community members reading thread. ” Windows Server  >  Directory Services ...

i have windows server 2016 hyper-v setup windows deployment server. attempting capture image server via pxe boot windows 10 edu (1703)  desktop. when attempt connect server in capture wizard, enter server address, click connect, instantly receive message: "the supplied kernel information version invalid". feel though there i'm missing. any information helpful. you might want ask question in forum dedicated deployment issues, such https://social.technet.microsoft.com/forums/en-us/home?forum=mdt.  there more deployment experts following forum. tim Windows Server  >  Windows Server 2016 General

i setup  windows 2008 r2 cluster, teamed public network on each server node. these servers ibm system x servers, integrated management module (imm), each server node has usb remote network device enabled. in order pass cluster validation check, provided different ip address imm on each node. then try disable public network (team 1) on active server node (node a), see whether can failover node. strange thing happened, failover didn't occur. estimate cluster network 1 in server node should down, it's not, change use imm network device. how can force cluster network use teamed public network adapter? i found reason. it's because set same subnet on team 1 , ibm imm. when set subnet on imm, failover cluster manager detects new cluster network 2, , won't interfere cluster network 1 now. Windows Server  >  ...

hi we got users gets locked out while working smart cards. if recall correct isnt pre-authentication type: 16 smart cards , 2 passwords? 0 for? ad account not locked when typing pin 3 times or more wrong. kerberos pre-authentication failed. account information: security id: account name: service information: service name: krbtgt/domain network information: client address: ::ffff:10.202.18.58 client port: 59483 additional information: ticket options: 0x40810010 failure code: 0x12 pre-authentication type: 0 certificate information: certificate issuer name: certificate serial number: certificate thumbprint: certificate information provided if certificate used pre-authentication. pre-authentication types, ticket options , failure codes defined in rfc 4120. if ticket malformed or damaged during transit , not decrypted, many fields in event might not present. you can refer below link query disc...

i'm trying setup new wds server upload , download our custom windows 7 images.  belive of wds server setup , ready.  grabbed generic boot.wim file windows 7 disk , uploaded wds server.  i've uploaded install.wim files have images ready pulled down.  every time boot the client , select first boot.wim file following error: http://www.christiano.ch/wordpress/wp-content/uploads/2011/05/wds_winpe_wdsclient_an_error_occured_while_starting_networking_thumb.png   just error sayd figured i just need add some new network drivers boot.wim file , re-import wds server. can instructions here: http://www.christiano.ch/wordpress/2011/05/13/windows-deployment-servicesadding-drivers-to-boot-wim/ however after re-upload boot.wim file wds server after adding new drivers still have 1 boot option client.  i'm wondering why new boot.wim file should have new drvers, although listed @ boot image on wds server, not displaying client boot fr...

i need go through few hundred windows servers , document ip settings, dns server set use. know can use psexec/netsh connect servers , view dns information i'm trying come way me automate process , export information excel spreadsheet. have pull information server 2003 , including 2012 r2. i'm hoping can suggest don't need 1 @ time. vincent sprague i found powershell script able use. http://techibee.com/powershell/powershell-get-ip-address-subnet-gateway-dns-serves-and-mac-address-details-of-remote-computer/1367 vincent sprague Windows Server  >  Windows Server General Forum

hi, i have multi-site ad environment domain abc.com. when observe ad replication in active directory sites , services, other sites have replication connection site5.abc.com. however, want site4.domain.com act master ad replication. general diagram appended below reference:- netdom query fsmo shows site1 has following:- schema master domain naming master pdc rid pool manager infrastructure master i thankful in resolving above issue.  regards, muhammad qasim. simply proceed following: run  dssite.msc go to  inter-site transports > ip create inter-site links provide links between site 4 , other sites remove old inter-site links wait until kcc finish job this posting provided no warranties or guarantees , , confers no rights. ahmed malek my website link my linkedin profile my mvp profile Windows Server ...

   currently having 2008 r2 domaincontroller in head office  and   8 new branch office ( around 50 users ) broadband connection . planning  branch loaction should authicated active directory in head office. best option ? 1. placing additional domain controller in each office , establishing vpn tunnel head office . 2. deploying rodc in each office since have around 50 users  i run "hub , spoke" model head office having writable domain controller 5 fsmo roles (get second writable dc there if can redundancy / dr purposes) , rodc @ each of 8 physical office locations.  use site-to-site vpn mode branch office connection head office.  see: deploying active directory branch office environments best regards, todd heron | active directory consultant Windows Server  >  ...

hi, how i configured active directory users , groups synchronized automatically on 2 windows server 2008 r2, if 1 server down users , groups on server can login other server (on 2 different wan location) setup same domain name. i did set service globle , added user , groups individual server.   thanks david   if setup in same domain don't need configure have them "sync".  ad uses multi-master replication every full dc has copy of every object in ad.   you did mention wan , comes play if have sites setup.  you can configure how domain controllers replicate (the lowest can configure via gui 15 minutes).   regularly check health of your environment by viewing eventlogs , tools repadmin , dcdiag.   thanks   mike http://adisfun.blogspot.com http://twitter.com/mekline Windows Server ...

hello, i working juniper technicians setting juniper ssl vpn use third party smart card certificates logon vpn. had setup certificate server authentication piece validating certificate presented juniper device. had setup secondary authentication method check active directory account (extracted san field in certificate). found out ad check checking existence of account , not checking whether locked or disabled. we inserted logic checks following based on user principle name - useraccountcontrol = 512 or 262656 , ms-ds-user-account-control-computed = 0. checking see if account normal account (512) or normal account requires smartcard interactive logon (262656) and check ensure account not locked. we prefer have full kerberos logon vpn juniper technician not sure how achieve because of hybrid nature of certificates using. does have ideas of how better authenticate juniper ssl vpn using third party certificates? thank time , consideration. vpn authentication in s...

http://windows.microsoft.com/en-us/windows7/what-is-the-difference-between-a-domain-a-workgroup-and-a-homegroup  tells: note homegroups aren't available in windows server 2008 r2 does mean that homegroups available windows server 2008 removed in windows server 2008r2? and why? hi vgv8, there several places shows homegroup intended added in windows 2008 r2 @ beginning, not added in end. cannot confirm reason why not added. shaon shan| technet subscriber support in forum| if have feedback on our support, please contact tngfb@microsoft.com Windows Server  >  Network Infrastructure Servers

hello, i need migrate 2003 cluster 2008 r2, having difficulty doing so. have 2003 2 node disk , node majority cluster has 3 groups (2 individual file shares) , separate group quorum. i'm trying migrate 2003 groups 2 node 2008 r2 cluster. i've ran through cluster migration wizard http://technet.microsoft.com/en-us/library/ff182337(v=ws.10).aspx), disk resources within group migrate, file shares don't. in summary: - ran 2008 r2 cluster run migration wizard , connected 2003 cluster - once wizard completes, left the newly migrated group on 2008 r2 cluster offline - took appropriate file share , disk resource group offline on 2003 - ensured iscsi disks migrated data showing correctly on 2008 r2 node (i'm using same drive letter 2003 node used moved disk) - brough resources online. resources fail come online client access point missing, add new access point ( http://blogs.technet.com/b/askcore/archive/2010/08/24/using-multiple-client-access-points-cap-in-...

hello, have 2 fileserver (windows 2012 r2) running in microsoft failover cluster. on both dfs installed. have following problem on 1 of these maschines.   after reboot dfs service did not start, because depends on remote registry service. have set startup typ of remote registry service automatic , started service. after reboot startup type of remote registry service change disabled, prevents start of dfs service. can again , again, after reboot remote registry service disabled. have idea disabling remote registry service ? kind regards matthias after solid week of troubleshooting microsoft support on severity case regarding disabling startup of remote registry service, believe have culprit. upon enabling registry auditing on several servers on key "\registry\machine\system\controlset001\services\remoteregistry", contains settings remote registry service, found this: a registry value modified. subject:     securi...

i use [i believe] internet explorer 7. problem everytime close a tab, window closes. doesn't show pop-up explaining why, doesn't restart. have open new windows, , re-open tabs , continue doing. @ first, thought whenever close last tab. wrong, closing first tab closes whole window. please help. thank you. hi,   besides meinolf’s suggestion, can check third party ie add-ons.   go ie> tools> manage add-ons , disable (as test) add-ons not microsoft. if problem disappears, can enable them 1 one check root cause.   if solution not work, suggest post issue internet explorer newsgroup. experts there more familiar ie , should able provide more suggestions.   discussions in microsoft.public.internetexplorer.general http://www.microsoft.com/communities/newsgroups/list/en-us/default.aspx?dg=microsoft.public.internetexplorer.general&cat=en_us_28cca3eb-7037-4d4f-bde1-d8efee1f1420&lang=en&cr=us   regards, bruce ...

hi, i'm looking take group of 31 excel workbooks, loop through them, value same field (m7), of general format, , sum total of workbooks. what i'm stuck on how data excel.  bit of web surfing far, have: $workbook = $excel.workbooks.open("c:\path\to\file\1_3_14.xlsx") $workbook.sheets.item(1).activate() $workbooktotal=$workbook.worksheets.item(1).range("m7").value $workbooktotal when run this, don't value, following, not number.  if change field format general number, same: $workbooktotal  (i have tired $workbooktotal.value, , same) issettable          : true isgettable          : true overloaddefinitions : {variant value (variant)} typenameofvalue     : system.object membertype          : parameterizedproperty value         ...

is there powershell cmdlet let me @ log/text file on remote machine? thanks hi, as long have access file, can use get-content , unc path: get-content \\computername\c$\folder\file.txt http://ss64.com/ps/get-content.html don't retire technet! - (don't give yet - 12,830+ strong , growing) Windows Server  >  Windows PowerShell

hi guys! i want deploy windows 8 in bunch of pc´s, decided use server 2008 wds make work little bit easier , quicker. hadn´t got problems during neither installation of wds nor wadk, when try create answer file through windows sim, starts creating new catalog doing this. during creation of catalog, receive error message saying had "unknown error" , error code: "0xc1420119" . do know why can´t create catalog?. don´t know, maybe problem of computer, because installed wadk in computer have, has windows 7, , can create catalog and, later, answer file without problems. , more, can take xml file , put in server 2008 , can deploy windows 8 perfectly. if know how resolve problem, please me because don´t want use pc if not necessary. thank much, guys. hi, first make sure correct clg file selected.  check following key: hklm\software\microsoft\windows\currentversion\devicepath - open regedit , browse hklm\software\microsoft\windows\cur...

hi i have server 2012 r2, , client getting message on machine window 2007 there time and/or date difference between client , server, can not log in administrator? i @ local machine , have tried log in local admin. returns a" there time and/or date difference between client , server" thank you? > @ local machine , have tried log in local admin. > returns a" there time and/or date difference between > client , server"   check system time on dc. if has correct time, enter bios setup @ client , set correct time there, too.   greetings/grüße, martin mal ein gutes buch über gpos lesen? good or bad gpos? - blog… , if bothers me - coke bottle design refreshment (-: Windows Server  >  Directory Services ...

we have 2 new servers, each @ different clients running server 2012 r2 , heard microsoft allow spin server 2012 r2 free in hyper v. wanted post here see how works typically use vmware since seems included use it. question once install hyper v role , create 20120r2 vm ask me product key or activate on own? not sure how licensing works yet. can shed light on how works? should licensed via avma https://technet.microsoft.com/en-us/library/dn303421(v=ws.11).aspx you license provider should have trained licensing specialist. better ask them or microsoft directly rather rely on anonymous forums replies. https://www.microsoft.com/licensing/servicecenter/help/contact.aspx       regards, dave patrick .... microsoft certified professional microsoft mvp [windows server] datacenter management disclaimer: posting provided "as is" no warranties or guarantees, , confers no rights. ...

 dear all, i facing issue win 2k8 server. have 2k8 server acts as ldap server. whenever try ldap bind server ssl (636 port) , gssapi/kerberos enabled, fails following error. ldap_sasl_interactive_bind_s: server unwilling perform (53)         additional info: 00002029: ldaperr: dsid-0c09048a, comment: cannot bind using sign/seal on connection on tls or ssl in effect, data 0, v1771 i have read in forum known issue win2k8 server. can throw light on if known issue , if yes, when fixed ? thanks, hi, this known issue.  please contact microsoft css hotfix 957072. sorry inconvenience has brought. thanks. this posting provided "as is" no warranties, , confers no rights. Windows Server  >  Windows Server General Forum ...

i have machine running hyper-v server 2008 r2 havean administrator password set , working need change it. can go windows 2008 machine , use computer management "connect machine" connect the hyper-v server when try access local users , groups tells me access denied. there way change local admonistrator password on hyper-v 2008 r2 machine? hi,   log hyper-v server 2008 r2 computer, press ctr + alt + del , option “change password”.     best regards, vincent hu   Windows Server  >  Hyper-V

i need audit single folder on server file creation events. has me stumped have partially working random users. i have ran auditpol /set /subcategory:"file system" /success:enable /failure:enable capture audit events i have enabled auditing creating files group. it auditing data myself , random other users, estimate 5% of total users being audited. ideas? -drew   hi, the following articles helpful work: http://support.microsoft.com/kb/310399 http://technet.microsoft.com/en-us/library/cc731607(ws.10).aspx there similar thread reference. http://social.technet.microsoft.com/forums/en-us/winserversecurity/thread/9e633bad-cda6-4ec4-8f04-c01de57ce767 please remember click “mark answer” on post helps you, , click “unmark answer” if marked post not answer question. can beneficial other community members reading thread. Windows Server ...

i looking ideas , solutions cheaply possible yet functional.  need setup video on demand , streaming video.  have 12 touch screen monitors , 10 flat panel displays.  users need able select video want watch , watch on touch screen.  flat panels have pre-determined video playing on loop.  i have 1 central spot these connect server provides these services.  know of way without having additional hardware connected touch screens?  trying away having have fat/thin client on touch screen.  rather have big usb hub, board or whatever attached server if need not sure how or if work. ideas? thanks information! just out of box thinking, might try using multipoint server:  http://www.microsoft.com/windows/multipoint/ Windows Server  >  Streami...

hello, got simple problem. on of programs want start, example program xyz, windows "the program can't start because c:\users\user\desktop\xyz.exe missing computer. try reinstalling program fix problem." but file there , work on windows 8/7/xp hope can give me idea fix. i tried create shortcut , launch admin , compatibility mode okay found solution problem, program missing dll file (msvcr110.dll). found out after tried again on windows 7 there notice me "dll" missing. now works :) Windows 10 Insider Preview  >  Windows 10 Insider Preview General

firstly let me appologise potentially posting in wrong area. we have exsting domain shall domaina.local , computers on site connected domain , well. the existing company split new company , move second site. on site have new system shall call domainb.local have whole load of new computers joined new domain. the question is, users domaina want roam on domainb , vice versa. we'd username@domaina.local able go login computer credentials @ computer on site b , vice versa , able access network folders if on home site. presume there needs sort of trust relaishonship (as obvious connection) etc. can point way please reading , research etc. thank you. hi  you should configure 2 way domain trust between these domains;check these articles; https://technet.microsoft.com/en-us/library/cc771580%28v=ws.11%29.aspx?f=255&mspperror=-2147217396 http://www.rebeladmin.com/2015/02/configuring-trusts-part-4/ then can configure permissions folder shares;also check article...

hi, we have installed windows 2008 server (64 bit).now want do hardening of binaries moving them other loaction on server.but can not do same because if moved or deleted binaries it's orignal location automatically appered again.binaries movement is possible in windows 2003 server by moving binaries other location & deleting form dllcache. (like...net.exe,ipconfig.exe,nslookup.exe). required regarding same windows 2008. waiting reply...   regards, kalpesh p    kalpesh pawar hi, i afraid moving system files other location not recommended solution security hardening. for security hardening, following information helpful: http://technet.microsoft.com/en-us/library/cc526440.aspx http://technet.microsoft.com/en-us/library/cc771361(ws.10).aspx this posting provided "as is" no warranties, , confers no rights. please remember click “mark answer” on post helps you, , click “unmark answer” if marked post not answer qu...

hi i want add share directory in iis 7 can access internaly through http help please samir   try option - http://learn.iis.net/page.aspx/264/shared-configuration/ since iis related question, may want post question in iis forum: http://forums.iis.net/ santhosh sivarajan | mcts, mcse (w2k3/w2k/nt4), mcsa (w2k3/w2k/msg), ccna, network+| houston, tx blogs - http://blogs.sivarajan.com/ posting provided no warranties,and confers no rights. Windows Server  >  Directory Services

hello. there seems problem setup if choose option not store updates locally. when choose store updates on local path, goes fine in setup process. if decide not store updates locally apparently can do, problems follows: the initial configuration stage (the link click on post-install steps after installing role) gives message configuring wsus server had fatal error it opens regular wsus mmc console starts config wizard if go through steps of wizard goes fine until section product classifications hangs hourglass forever. if click on "all classifications" move things along, tells selection have made not valid , not saved. you can finish wizard without more problems when synchronisation takes place no updates synchronised. when go options section in mmc , go products , classifications appears open dialog box 2 tabs, , dialog box disappears , message box says "something attempted use has been removed database party. snap-in being refreshed fix issue." at point...

hi there, is information available powershell commands aren't working in 32bit powershell or vice versa? or psh modules working 64bit powershell or vice versa? i recognized e.g. command "format-volume" in 32-bit shell isn't supported on a 64-bit operating system windows server 2012. i'm looking general information combinations or commands working or not. yours fg clodt fgc hi, there's not comprehensive document covers every possible module out there (at least don't know of any). perhaps else have info on this, doubt it. that being said, there's little reason use 32bit powershell console anyway (that i've ever encountered). time needed 32bit configmgr cmdlets. don't retire technet! - (don't give yet - 12,830+ strong , growing) Windows Server  >  ...

i have adm templates 2007 installed there doesn't seem entry under word or outlook this, have ideas?  i found unanswered thread 2010 same thing of googling has got me today. hi, please refer following link download new adm file office 2007 check result. 2007 office system administrative template files (adm, admx, adml) , office customization tool version 2.0 http://www.microsoft.com/downloads/details.aspx?familyid=92d8519a-e143-4aee-8f7a-e4bbaeba13e7&displaylang=en&displaylang=en administrative template files (adm, admx, adml) , office customization tool updates 2007 office system http://technet.microsoft.com/en-us/library/cc178992(v=office.12).aspx regards, arthur li technet community support Windows Server  >  Group Policy ...

in cluster manager, cluster > services , applications > right-click > configure service or application, don't see iis or sql server mentioned. how "high availability" versions of apps created?   tia, barkingdog  hi,   you can refer following guides.   sql server 2005 failover clustering white paper http://www.microsoft.com/downloads/details.aspx?familyid=818234dc-a17b-4f09-b282-c6830fead499&displaylang=en   installing sql server 2008 r2 failover cluster http://msdn.microsoft.com/en-us/library/ms179410.aspx   how to: create new sql server failover cluster (setup) http://msdn.microsoft.com/en-us/library/ms179530.aspx   deploying iis on failover cluster http://blogs.msdn.com/b/clustering/archive/2009/06/01/9674799.aspx     best regards, vincent hu   Windows Server ...

i trying write dsc resource manage iis url authorization rules, when attempting remove inherited rule (via clear-webconfiguration) instead of removing rule creating local copy of rule. the workaround run clear-webconfiguration command twice isn't elegant , results in warning if rule trying remove isn't inherited. i have few questions in relation this: if expected behaviour there way override this? is there way determine via get-webconfiguration (or other) if rule has been inherited or local? steps reproduce: 1. iis site (e.g. default web site) has inherited url authorization rules (e.g. allow users) 2. in powershell execute clear-webconfiguration -filter "/system.webserver/security/authorization/add[@users='*' , @roles='' , @verbs='']" -pspath "iis:\sites\default web site" expected results: 1. url authorization rules updated remove allow users directive. actual results: 1. url authorization rule allow users...

  hi all! experiencing problems more 5 years , have changed our hardware  try solved , still having same issues. well. let me try explain it: when 200 or more users connects in our server, iis frozen , when page frozen, if open page in same server, page run instantaneously.. so  queue or that. i've done print screens and  wanted help.. please don't know else do.. click enlarge looking solution, we've done changes in  sessionviewsize, sessionpoolsize using regedit , still same problem   http://forums.iis.net/p/1146213/1856020.aspx mike hi,   as issue related iis, not best resource troubleshoot issue here. please discuss in our iis forum:   http://forums.iis.net/   tim quan   Windows Server  >  ...

hello team, can please issue.  have 2 sites in ad , users experiencing issue while printing letter "t & m". changes # while printing labels. kits hi, i'd confirm there no related custom page size printer policy setting cause issue. if issue persist, please try use processmonitor troubleshoot issue: process monitor v2.96 http://technet.microsoft.com/en-us/sysinternals/bb896645.aspx hope helps! best regards elytis cheng elytis cheng technet community support Windows Server  >  Print/Fax

rdserver1 servers broker, host, gateway, licensing , web access. has 50 per user license. works fine. add 2nd rd server (rdserver2), looks good.  both rd1 , rd2 show in server manager\rds, , roles show correctly rd2 rd session host, while rd1 session host along mentioned above.  both servers show under server manager\rds\servers, , if run rd licensing diagnose on rd1, shows correct per user licenses.  if run same diagnose on rd2, shows 0 number of licenses , licensing mode: not configured, problem message of "the licensing mode remote desktop session host server not configured".  however, list rd1 license server in summary pane.    i have tried using powershell set rd1 licensing server, still didn't work.  $obj = gwmi -namespace "root/cimv2/terminalservices" win32_terminalservicesetting $obj.setspecifiedlicenseserverlist("license.contoso.com") also, make sure rd2 member of terminal server computers ...

good afternoon everyone;  once again i've hit wall in deploying rd services. scenario stated:  a non-administrator domain user trying log 1 of pooled virtual desktops (running windows 7). said user gets prompted windows security login domain credentials; instead of being directed virtual desktop, user redirected second logon session actual server.  ie: user\administrator has logged in session he/she see's server manager, hyper v etc running.  [please note: when user\administrator attempts log remote desktop services account redirected 1 of pooled vms. both administrator , non-admin accounts on access list pooled vms in settings of golden template, , in usergroup of collection] when user\non-administrator has logged in see copy of server 2012 running same "data retrieval failure" error on server roles.  while checking event viewer series of verbose/error codes such.  verbose 1301: connection broker received non-admi...

hi, know if possible migrate forest 2003 (12 domains) @ 1 domain 2012 r2. thank you. sylvain and if need merge forest on single domain,also can migrate them admt,first shoud configure domain trust between domains,then migrate. domain trust ; https://technet.microsoft.com/en-us/library/cc816837(v=ws.10).aspx admt ; https://technet.microsoft.com/en-us/library/cc974332(v=ws.10).aspx this posting provided no warranties or guarantees,and confers no rights. best regards burak uğur already mentioned can migrate these 2 different domains admt,also can migrate sid history. https://technet.microsoft.com/en-us/library/cc974410(v=ws.10).aspx this posting provided no warranties or guarantees,and confers no rights. best regards burak uğur Windows Server  >  Migration ...

hey, when attempt install 32 bit server 2008 package from http://www.microsoft.com/en-us/download/details.aspx?displaylang=en&id=2852 error saying it's not correct version. in case tried 3 other versions, expected give same error. ideas? thanks in advance, hi, based on description, can try contact microsoft customer support services obtain hotfix see if helps. a hotfix rollup package active directory web service available .net framework 3.5 sp1 http://support.microsoft.com/kb/969166 besides, following thread focused on similar issue ours , can referred more information. active directory management gateway service - install problem http://answers.microsoft.com/en-us/windows/forum/windows_other-windows_install/active-directory-management-gateway-service/d02c3ee7-ee4d-e011-8dfc-68b599b31bf5?tab=question&status=allreplies best regards, frank shen please remember mark replies answers if , unmark them if provide no help. if have feedback technet s...

hello, i having issue setting remote desktop services virtual desktop pools. current setup is: rds session host in redirection mode rds broker rds web access hyper-v server 2 win7 virtual machines i have created desktop pool , added 2 win7 vm's. when click virtual desktop pool tries launch rdp session session host server running in redirection mode fails. i have followed technet guide deploying virtual desktop pools. any appreciated. seems server set drain mode , dening new user logons.  please refer blog configuration: http://blogs.msdn.com/rds/archive/2007/06/15/introducing-terminal-services-server-drain-mode.aspx thanks rong posting provided "as is" no warranties, , confers no rights. Windows Server  >  Remote Desktop Services (Terminal Services) ...

this issue has been around 2008 or server os uses vista kernel or higher 2008 r2 testing in vmware 4 vm disks i have 4 hdds , norm mount them folders , share folder before them example f:\share inside there 3 folders 1 2 3 disks 1 2 3 mounted them folders (f:\share shared network drive thats been viewed on win7 system), in 2003 fine can go them , out (press back) in 2008 if go them , press shortcut folder no longer shows 1 whent into, times comes if press refresh or wait 10 secs refresh how fix issue been issue more 3-4 years prevented me moveing away 2003 server, easy see issue, copy of 2008 r2 or vista based server version , happens right away, can test on live server if have 2 disks make empty folder , mount second disk , share folder before , view on second system press no longer shows hi leexgx, i tried reproduce steps provided. i noticed when mounted folder parent folder, icon of mounted folder changed shortcut hidden folder. according attrib command, mounted ...

had issue other day able change password on aduc logged in domain user account. turns out domain admin credentials has cached on computer inadvertently.  have script run on pc on startup or login looks cached credentials start prefix , if there - remove them.  found following module pretty close need doesn't filter specific username that.  target or type.  willing me modify specific user or user starts "x"? https://gallery.technet.microsoft.com/scriptcenter/cached-credentials-99b1dfdc/view/discussions this looks can them all, , lists them, function remove specific target, cant remove target contains x user. here example of produces. target                                                   ...

if save password rdp session profile , try access remote server lock user account if password not match.  this takes 1 connection attempt client. environment: client version 8.0.24 (build 26825) on el captain (osx 10.11.1) gateway not configured server windows 2012 server  security policy has account lockout after 5 failed attempts. hi, as account locked, please check event on server side see reason account locked. i'm thinking if caused design incorrect password verified several times once trying remote server - may verified on client, rd gateway, broke , host etc 1 logon triggered account lockout.  please remember mark replies answers if , un-mark them if provide no help. if have feedback technet support, contact tnmff@microsoft.com. Windows Server  >  R...

i have internet explorer 8, continually getting "not responding" notification, screen fading white, , having use task manager shut down. other problem having when ever search (it not matter search engine use) page results come up, can not page after that, can not close tab, or click on of results , continue on next page. i using windows vista ultimate, , have never had problem before, , have been using setup 3 yrs on computer. of started 2-3 weeks ago. frustraing having use task manager close program time after have done search something. can 1 please me?????? hi,   i suggest discussing issue in our internet explorer newsgroup:   http://www.microsoft.com/communities/newsgroups/list/en-us/default.aspx?dg=microsoft.public.internetexplorer.general&cat=en_us_28cca3eb-7037-4d4f-bde1-d8efee1f1420&lang=en&cr=us   i hope issue can resolved soon.   tim quan - msft   Windows Server ...

since upgrading windows 10 machine creators update, can no longer connect remote desktop mac using version 8.0.38 (build 27253). i've verified can telnet , connect port 3389 mac, when using actual client, acts if machine not responding. if switch machine running windows 10 creators update, have no issues connecting same machine mac cannot connect to. hello vinny!  we not able reproduce issue. helps in situations - restart windows pc. - use ip address instead of fqdn. as alvin suggested try our preview application see if solves issue. Windows Server  >  Remote Desktop clients

hi, me again! i working hard applocker work legacy logonscripts netlogon share. i use path rule allow start of bat file. what i've tried far: \\domain.name\netlogon \\domain.name\netlogon\* \\domain\netlogon \\domain\netlogon\* \\everysingledc\netlogon \\everysingledc\netlogon\* i have tried %logonserver% variable (which doesn't work, applocker doesn't support variable). can me this? don't seem work. has got solution? thanks in advance, appreciated. david hi kevin, thanks reply. the script , executable rules in place have be. have say, not first time use applocker, sure first time doesn't want. i have deleted old applocker gpo , restarted scratch. created default rules, , had wizard automatically generate rules netlogon , sysvol. all executables , scripts supposed called included in new rules, have checked that. the default executable rule windows folder doesn't work "%windir%\system32\windowspowershell\v1.0\powershell.exe...