Windows Server 2008 Standard 64bit RAID-1 32bit driver forced & BSOD at boot after dcpromo

-

 sorry bad englisch, not exist similar forum in german language.

this story:

gigabyte ga-ma78gm-s2h mainboard sata dvdw , 2x seagate st3750330as raid-1 @ 3gbit sata-ii ncq enabled.

i want install windows server 2008 64bit out of action pack on first 100gb partition of raid volume. setup starts mentions have load driver dvdw booting installationmedium from. first thing sounds curious me. ok, try load driver ati sb700 raid controller on mainboard. not possible load 64bit driver! able choose 32bit driver during installtion. tried way. choose 32bit driver dvdw. on next screen raid volumes shown in mask, maybe because of loaded 32bit driver. ok, on went fine. have 3 partitions: c:\ system 100gb, d:\ programme 100gb , e:\ daten 500gb. installed drivers on c:\, programms on d:\ , had ~300gb of data on e:\.

now did dcpromo, created directories e:\active_directory\ntds , e:\active_directory\sysvol placed files during installation. after installation forced reboot, fine checkdsk c:\ during reboot followed reboot , bsod:

stop: c00002e2 directory services not start because of following error:
ein das system angeschlossenes gerät funktioniert nicht.

error status: 0c0000001.
please shutdown system , reboot directory services restore mode, check event log more detailed information.

absolut reproduceable, no idea can do....

i checked event log, not know information important me not. bootet directory restore mode, no idea there. ran ntsdutil, no idea tool. dr-mode runs fine, ad disabled there...

is driver problem?
am not allowed out ad-files on partition?
is there problem writing/reading in created ad-files?

please, give me hint!

 

hello,

 

i sorry not @ german, sentence "ein das system angeschlossenes gerät funktioniert nicht" mean "a system connected device not work"?

 

the first thing should is, after log windows server 2008, installing 64-bit drivers. or, contacting hardware manufacturers latest drivers windows server 2008. please note drivers loaded during installation windows pe, environment installing windows server 2008 , windows vista, though moved driver store in operating system.

 

note there requirements should pay attention when deploy 64-bit editions of windows server 2008, such signed drivers. more details, please refer to:

 

installing windows server 2008:

http://technet2.microsoft.com/windowsserver2008/en/library/ef8f3711-d1d1-4d4a-8a04-ee7bf61105541033.mspx

please take @ following article , see if situation same:

 

a domain controller might fail start in disaster recovery mode if active directory databases , logs located in same folder structure different drive:

http://seer.entsupport.symantec.com/docs/300942.htm

 

if problem remains after tried above methods, may need collect , analyze crash dump file. trouble shoot problem efficiently, suggest speak directly microsoft support professional crash dump can analyzed. complete list of microsoft product support services phone numbers , information support costs, please go following address on world wide web:

 

<http://support.microsoft.com/directory/overview.asp>

 

i hope helps.

 

best regards,

chang yin


Windows Server  >  Windows Server General Forum



Comments

Post a Comment

Popular posts from this blog

Group Policy Event ID 1058 Error Code 1326 (The user name or password is incorrect)

-
i seeing odd error on 1 of our domain controllers. have dealt event id 1058 errors whereby policy (or policies) not replicating, receiving error along error code 1326 on server, , apparently happening default domain policy: log name:      system source:        microsoft-windows-grouppolicy date:          8/10/2015 3:09:54 pm event id:      1058 task category: none level:         error keywords:      user:          s-1-5-21-1484152634-2550175353-3916092219-3287 computer:      <dc name>.<domainname> description: processing of group policy failed. windows attempted read file http://schemas.microsoft.com/win/2004/08/events/event ">   <system>     <provi...
Read more

Suspicious event log Event ID: 4905

-
hi thr, could please me understand causing such event logs generate ? as  i understand, vssvc.exe pertains volume shadow copy used backup purpose.  we have third party application used taking backup of servers. the event longs generated following messages: 1) attempt made unregister security event source. 2) attempt made register security event source. these events not regular generated on random days. standard fields: date:               2013/10/19 time:               02:32:19 importance:         critical rule name:          security event monitored machine:  <domain controller> log format:         windows log name:           security event id:           4905 in work hours:      yes dynamic fields: internal timestamp: 2013/10/19 ...
Read more

DCOM received error "2147746132" from...

-
hi everybody, i have dc (my windows essentials 2012 server) , windows 2012 server in network.  the windows server 2012 inside domain. on server, got "non stopping" error says in event logs : ===> dcom received error "2147746132" fromd computer xxxx(my dc computer) while server trying activation : {6df8cb71-153b-4c66-8fc4-e59301b8011b} it never stops, got 11000+ new events :s i found : http://support.microsoft.com/kb/971153/fr i'm not sure should ? does got idea ? matthieu. hi, please try solution mentioned in below link: http://www.eventid.net/display-eventid-10006-source-dcom-eventno-272-phase-1.htm regards, cicely Windows Server  >  Windows Server 2012 General ...
Read more